Gas saving devices, or the water 4 gas system, are a do-it-yourself technology based on splitting water on board of your vehicle. This water for gas technology doesn’t use the resulting gas to power the vehicle. It doesn’t work like this. What it does is to greatly improve the efficiency of the engine’s combustion.

It has been designed with the beginner and very tight budgets in mind. You don’t need any specialized tools either. You can build these gas saving devices for $20 to $100 in the comfort of your own home using basic hand tools, install it in a few minutes and remove it even faster.

The installation of gas saving devices based on the water 4 gas system doesn’t make any modifications neither to the engine nor the fuel injection or computer systems of your car. Any mechanic can install it easily.

What are cars that run on water

For now cars that run on water are vehicles that have installed such gas conversion kits. Although Japan is making progress in water technology, cars that run on water 100% are still something for the future.

In fact, this technology has more than 90 years. The water 4 gas entrepreneurs have simply rescued it from oblivion and designed a simple structure that relies on inexpensive hardware. There are many hydrogen generator devices, but the design of the water4gas.com saving devices is especially simple and very safe for the beginner. The bubbler, electrolyzer and water reservoir are combined into a simple device.

The water for gas saving device uses coiled or spiraled electrode wires instead of flat or spiraled plates. The coil creates then a magnetic vortex, which helps to split the water. This had the added advantage of using very little power from the electrical system of your car. This feature simplifies the system even more and lowers its cost.

Where does water splitting fit in the water fuel technology

There are three fundamental elements that result in water splitting: the direct current that flows through the electrode wires to the water, the magnetic vortex that is created by the shape of the electrodes, and finally the vacuum that is provided by the very engine of your car.

Due to the more complete combustion derived from the water fuel technology we have an improved mpg and lower emissions into the air. It’s a proven fact that the internal combustion of most cars’ engines is very inefficient, about 20% to 25%. Ask any mechanic. 75% to 80% of the gas you use to fill your tank is not used to drive your car, but to pollute the environment in the form of harmful gas and carbon deposits from the unburned fuel. We also have the excessive heat that translates into global warming, the vibrations and noise like pinging and knocking.

The main culprit is the oversized fuel droplets present in the mixture. Hydrogen is a very small particle. When it hits a droplet, it cuts it into smaller droplets and attaches itself to them. This hydrogen-boosted finer mixture is now capable of burning more completely.

Not only do we get an improved performance, but the engine steam-cleans it whenever it is runnng. As a result, we have a quieter and smoother operation. Some drivers report that the first time they checked the oil level after installing their gas saving devices they thought the oil had run completely out. What had happened was that the oil was so clean and transparent that at first they hadn’t seen any oil on the dip stick.

Others feel uneasy because they don’t hear the car’s engine. This is because it’s so much quieter and they have to get used to it.

Water 4 gas saving devices benefit you and your car in more than one way. You’ll save on gas and will help to clean the air we breathe, if only a little bit. Every drop counts.